Scielo RSS <![CDATA[Boletín de Ciencias de la Tierra]]> http://www.scielo.org.co/rss.php?pid=0120-363020200002&lang=en vol. num. 48 lang. en <![CDATA[SciELO Logo]]> http://www.scielo.org.co/img/en/fbpelogp.gif http://www.scielo.org.co <![CDATA[Quality assessment in the supply chain of copper mining in Chile]]> http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-36302020000200005&lng=en&nrm=iso&tlng=en Abstract The objective of this research is to generate new knowledge on the assessment of quality in the supply chain of copper mining located in the Antofagasta region in Chile, through the information obtained in the application of a survey to managers of the mining companies in 2018 and deliver recommendations that allow obtaining higher levels of productivity and efficiency in said industry. The results of the investigation show a high assessment of quality by mining companies. Notwithstanding the foregoing, there is also evidence of a lower assessment of the certification of quality standards, such as ISO 9001 and 14001, which generates a discussion on the contribution and validity of quality standards in the development and growth of the mining business.<hr/>Resumen El objetivo de esta investigación es generar nuevo conocimiento sobre la valoración de la calidad en la cadena de suministro de la minería del Cobre localizada en la región de Antofagasta en Chile, a través de la información obtenida en la aplicación de una encuesta a directivos de las compañías mineras en el año 2018 y entregar recomendaciones que permitan obtener mayores niveles de productividad y eficiencia en dicha industria. Los resultados de la investigación evidencian una alta valoración de la calidad por parte de las compañías mineras. No obstante lo anterior, también se evidencia una menor valoración a la certificación de normas de calidad, tales como la ISO 9001 y 14001, lo cual genera una discusión sobre el aporte y validez de las normas de calidad en el desarrollo y crecimiento del negocio minero. <![CDATA[Technical analysis on the causes of the mass movement occurred in "Las Nieves" Quarry, city of Copacabana]]> http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-36302020000200012&lng=en&nrm=iso&tlng=en Abstract On October 26, 2016, a large-scale mass movement occurred surrounding the Medellín-Bogotá highway, near the municipality of Copacabana. This paper investigates the physical and legal conditions of the place where the landslide occurred, and thus, to corroborate the causes, the possibility of avoiding or preventing the phenomenon and the influence of anthropic activities in the sector. To determine the susceptibility to mass movements and verify the physical conditions, it was carried out by means of geological mapping, geomorphology and interpretation of satellite images. The legal and bibliographic review was consulted in the reports of the event, the PBOT of the municipality of Copacabana and the mining file of the Cantera Las Nieves. The area was found to be highly susceptible to mass movements, and exploitation in the Cantera Las Nieves triggered the landslide, which could be avoided. Similar phenomena could occur in the near future in the area.<hr/>Resumen El 26 de octubre del 2016 ocurrió un movimiento en masa de gran magnitud en inmediaciones de la autopista Medellín-Bogotá, a la altura del municipio de Copacabana. El presente trabajo investiga las condiciones físicas y jurídicas del sector, buscando corroborar las causas del fenómeno, la posibilidad de evitar o prever el mismo y la influencia de las actividades antrópicas como detonantes. Las condiciones físicas se verificaron mediante cartografía geológica, geomorfológica, e interpretación de imágenes satelitales, para determinar la susceptibilidad a movimientos en masa. La investigación jurídica y bibliográfica consultó los reportes del evento, el PBOT del municipio de Copacabana y el expediente minero de la Cantera Las Nieves. Se encontró que la zona presenta alta susceptibilidad a movimiento en masa y la explotación en la Cantera Las Nieves detonó el movimiento en masa, el cual pudo ser evitado. Fenómenos similares se podrían presentar en un futuro cercano en el sector. <![CDATA[Sequential stratigraphy of the Guajira Lower Sub-basin]]> http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-36302020000200023&lng=en&nrm=iso&tlng=en Abstract Sequence stratigraphy comprise one useful and solid tool for understanding stratigraphy historical of the rocks in subsurface. Based on staking patterns identified on well logs at southeast of the area, it is possible to interpret progradation, retrogradation trends, and their bounding surfaces, which are also interpreted on the seismic lines. Then, with petrophysical analyses populate sequences of interest into tectonostratigraphic model. The Lower Guajira Sub-Basin comprises a huge depocenter of stacking rocks from Cretaceous and Cenozoic age. The results show three depositional sequences, involving seven system tracts. Considering ages reported for some depth intervals, it is possible the interpretation based on Wheeler domain, getting depositional, erosion and non-depositional stages.<hr/>Resumen La estratigrafía de secuencias se constituye en una herramienta sólida y útil para el entendimiento y disposición de la historia estratigráfica de las rocas en el subsuelo. A partir de la identificación de patrones de apilamiento de datos geológicos o geofísicos (registros de pozo y datos sísmicos). Así, junto a análisis petrofísicos, localizados al sureste de la Guajira se interpretan la geometría y tendencias sedimentares, de los diferentes paquetes de roca dispuestos en el subsuelo. La Sub-cuenca de La Baja Guajira, constituye un gran depocentro, con secuencias de sedimentos apilados con edad Cretácica y Cenozoica. Como resultado de este estudio se interpretaron tres secuencias deposicionales que incluyen siete tratos de sistema, y considerando la información de los pozos se reportan algunas edades para diferentes intervalos de profundidad, a partir de la cual se construye un diagrama de Wheeler, donde se establecen periodos de depositación junto con intervalos de erosión, sufridos en la cuenca. <![CDATA[Site characterization using geophysical and geotechnical Prospecting. Case study main road North Central Trunk (National Route 55) at Km 68 + 500 in the Municipality of Pamplona, North of Santander, Colombia]]> http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-36302020000200030&lng=en&nrm=iso&tlng=en Abstract In the present investigation, geophysical and geotechnical techniques were applied to characterize the subsoil at the height of Km 68 + 500 in the municipality of Pamplona, define the electrical resistivity, seismic velocity type P and S, dynamic parameters of the soil, type of soil profile and acceleration spectrum curve using NSR10 title A, carrying out two phases: one in the field, where topographic survey was performed, two (2) SPT tests, four (4) SEV, two (2) TRS lines, two (2) of MASW 1D and 2D; and the data processing phase to generate 2D images of the profile, interpret and correlate, resulting in P wave velocities between 499m / s and 1714m / s, S wave velocities between 210m / s and 466m / s and resistivities between 6.06 Ω -m and 581.05 Ω-m., Type D soil profiles composed of rigid materials, sands with the presence of clay and saturated silty clay.<hr/>Resumen En la presente investigación se aplicaron técnicas geofísicas y geotécnicas para caracterizar el subsuelo a la altura del Km 68+500 del municipio de Pamplona, definir la resistividad eléctrica, velocidad sísmica tipo P y S, parámetros dinámicos del suelo, tipo de perfil de suelo y curva de espectro de aceleración mediante la NSR10 título A, llevando a cabo dos fases: una de campo, donde se realizó levantamiento topográfico, dos (2) ensayos de SPT, cuatro (4) de SEV, dos (2) líneas de TRS, dos (2) de MASW 1D y 2D; y la fase de procesamiento de datos para generar imágenes 2D del perfil, interpretar y correlacionar, dando como resultados, velocidades de onda P entre 499m/s y 1714m/s, velocidades de onda S entre 210m/s y 466m/s y resistividades entre 6.06 Ω-m y 581.05 Ω-m., perfiles de suelo Tipo D, compuestos de materiales rígidos, arenas con presencia de arcilla y arcilla limosa saturada.