SciELO - Scientific Electronic Library Online

 
 issue42Electroless deposition of Ni-P deposits and study of the influence of content of phosphorus on the corrosion resistanceEffect of the engine load level and pilot fuel quantity on the mechanical and environmental perfomance of a dual-fuel compression ignition engine in power generation author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Revista Facultad de Ingeniería Universidad de Antioquia

Print version ISSN 0120-6230On-line version ISSN 2422-2844

Abstract

MUNOZ CHAVES, Javier Andrés; MUNOZ MENESEA, Rodrigo Arbey; MANCILL, Paulino  and  RODRIGUEZ PAEZ, Jorge Enrique. Study of the ceramic processing of clays from "La Codicia" (Guapi, Colombia) for their potential use in the elaboration of ceramic pieces. Rev.fac.ing.univ. Antioquia [online]. 2007, n.42, pp.68-78. ISSN 0120-6230.

In this work the characteristics of clay from the region of Guapi, Cauca, Colombia were determined. Also, a methodology was established to defi ne the conditions to conform ceramic pieces. Chemical structure, characteristic composition and thermal behavior of raw material were determined using X-ray fl uorescence, (FRX), X- ray diffraction (DRX) and thermal gravimetric analysis (ATD/TG), respectively. Different stages of the ceramic processing were studied paying attention to dosage of the ceramic pastes, pressing of the pieces, drying and sintering. Variables controlled were shaping pressure, lost of weight, time of drying, density in green and sintering temperature, among others. To achieve an appropriate drying it was necessary to maintain the samples in a controlled humidity atmosphere during about 7 days. Independent of the composition of the pastes, sintering above 1000 °C was necessary to obtain high density samples considering that at 950 °C des-density of samples was observed probably due to "Ostwald ripening" type phenomenon.

Keywords : Clays; characterization; shaped; ceramic processing; drying; sintering.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License