Resumen

VELASQUEZ, Sandra M.  y  GIRALDO, Diego H.. Characterization and evaluation of vulcanization time for colombian natural rubber from three hevea brasiliensis tree clones. Ing. compet. [online]. 2014, vol.16, n.2, pp.225-233. ISSN 0123-3033.

Significant projects for natural rubber (NR) production in Colombia have been developed in the past two decades. However, several topics about the properties of colombian NR have not been studied yet. In this work, NR obtained from FX3864, IAN873 and IAN710 rubber tree clones, cultivated in Tarazá-Antioquia-Colombia, is characterized by FTIR, DSC and TGA. Also, a comparison with SGR10 guatemalan rubber and technically specified rubber of Caquetá, Colombia, is carried out. Rubber compounds were manufactured following the same formulation, varying only the type of natural rubber used as matrix. Uncured mixtures were evaluated by vulcanization rheometry at 160 °C, and cylindrical and tension specimens were molded using compression molding. Optimal vulcanization time for each geometry was determinated based on their elastic modulus under tension and uniaxial compression, a methodology that can be applied to commercial products. Test specimens for compression-set, density and hardness were moulded using the vulcanization optimal times. Some differences between FTIR spectra, decomposition temperature, rheometric parameters and mechanical properties of the natural rubbers compounds were identified. Some recommendations for Colombian natural rubbers processing are postulated, seeking a better reliability

Palabras clave : Characterization; natural rubber; technically specified rubbe; vulcanization.

        · resumen en Español     · texto en Español     · Español ( pdf )