SciELO - Scientific Electronic Library Online

 
vol.72 número2Evaluación de un colorante y aceite extraídos de residuos de aguacate como componentes funcionales de una formulación de jabón líquidoEvaluación y modelado de las propiedades y características antioxidantes de una nueva variedad de papa (Primavera) durante su almacenamiento a 4 °C índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad Nacional de Agronomía Medellín

versión impresa ISSN 0304-2847versión On-line ISSN 2248-7026

Resumen

TORRES, María Isabel Arango; RODRIGUEZ, Misael Cortés  y  AVILA, Esteban Largo. Stability of a colloidal suspension of yacon ( Smallanthus sonchifolius ) intended for spray drying. Rev. Fac. Nac. Agron. Medellín [online]. 2019, vol.72, n.2, pp.8863-8871. ISSN 0304-2847.  https://doi.org/10.15446/rfnam.v72n2.75362.

Yacon (Smallanthus sonchifolius) is a tuber with a high content of active compounds that offer health benefits, so its productive chain seeks new alternatives to generate yacon products with added value; however, it tends to be a perishable product due to its high aw, chemical composition, and enzymatic activity. The influence of both composition and homogenization in the colloidal stability of yacon suspensions was evaluated for later use in spray drying. Response surface methodology and a central composite design were used, considering three independent variables: homogenization time (TH) (4-6 min), xanthan gum (XG) (0.1-0.2%), and acidity (0.1-0.3%); and the following dependent variables: zeta potential (ζ), color (CIELab), viscosity (μ), stability index by spectral absorption (R), and particle size (D10, D50, and D90). The values of the independent variables that best fit the experimental optimization criteria were: XG=0.16%, acid=0.3%, and TH=4.8 min. The values of the experimental dependent variables and the variables predicted by the quadratic model were ζ=-33.8±4.0 and -37.6 mV, μ=1143.0±93.4 and 1000 cP, R=0.45±0.1 and 0.48, D10=127.8±8.2 and 138.1 μm, D50=251.2±16.3 and 267.7 μm, D90=424.3±28.7 μm and 463.9 μm, L*=41.7±1.4 and 41.8, a*=0.02±0.85 and 1.6, and b*=15.0±1.3 and 14.8, respectively. The colloidal suspension showed adequate physicochemical stability, favored mainly by repulsive forces, homogenization, and rheology of the continuous phase; reaching a content of total solids of 12.5%.

Palabras clave : Particle size; Stability index; Viscosity; Zeta potential.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )