SciELO - Scientific Electronic Library Online

 
vol.76 número160OPTIMIZACION DE LAS PROPIEDADES DE TRANSPORTE IONICO DEL CONCRETO Y SIMULACION DEL ENSAYO ASTM C1202DEFORMACIÓN ELÁSTICA RESIDUAL EN LÁMINAS DE ACERO AISI 304 RECUBIERTAS CON UNA PELÍCULA DE NITRURO DE TITANIO DEPOSITADA POR PVD-MAGNETRON SPUTTERING índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183

Resumen

MONTOYA, JUAN E.; VARGAS, FABIO  y  CALDERON, JORGE A.. PROTECTIVE CAPACITY EVALUATION OF THERMAL SPRAYED Ni-SiC y Ni-Co-W COATINGS. Dyna rev.fac.nac.minas [online]. 2009, vol.76, n.160, pp.195-206. ISSN 0012-7353.

The behavior of thermal sprayed nickel, nickel-cobalt-tungsten and silicon carbide / nickel coatings as coatings to protect steel substrates against corrosion in aggressive environment was studied. In spite of the porosity exhibited by these coatings the obtained results show that they can isolate and protect the substrate against corrosive substances because the pores are not connected and then the diffusion phenomena is more difficult. The results show that the protection capacity of three-layer (nickel / nickel-cobalt-tungsten / silicon carbide - nickel)coatings is higher that those the bi-layer (nickel / nickel-cobalt-tungsten) and the protection capacity of bi-layer coating is higher that monolayer (nickel) coating.

Palabras clave : coatings composites; corrosion; nickel; thermal spray.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons