Resumen

BETANCUR-PEREZ, Gabriel; TORO-BOTERO, Francisco Mauricio  y  GOMEZ-GIRALDO, Andrés. Methodology for hydrodynamic model selection: Case study: spatial variability of the thermal structure in the Riogrande II tropical reservoir, Colombia. Dyna rev.fac.nac.minas [online]. 2016, vol.83, n.198, pp.154-164. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v83n198.50400.

This article presents a methodology for a guided selection of a hydrodynamic model to study physical processes in a reservoir. It is based on both qualitative and quantitative criteria that are applied in order to study the spatial variability of the thermal structure in the Riogrande II tropical reservoir. The method consists of three main stages: i) definition and search, ii) pre-selection, and iii) selection. As a result, the DELFT3D and MIKE3 models were implemented, and the simulated temperature profiles were compared to field data that was collected between March 23^rd and 27^th, 2010. ELCOM was defined as a reference model, and the time series of the thermocline depth, the mixing layer depth, and its average temperature were compared with the selected models. The final selection was supported by using three different statistical parameters: the index of agreement (d₁), the MAE, and the RMSE. The quantitative analysis showed that the DELFT3D model behaves better than MIKE 3.

Palabras clave : methodology; model selection; three-dimensional hydrodynamic model; tropical reservoir; thermal structure; ELCOM; DELFT3D; MIKE3.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )