Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
DYNA
versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183
Resumen
MESA-MONTOYA, Carlos Andrés; QUINTERO-RIAZA, Héctor Fabio y GUTIERREZ-MADRID, Federico. Morphological Synthesis and workspace design for a parallel manipulator with linear actuators. Dyna rev.fac.nac.minas [online]. 2020, vol.87, n.213, pp.129-139. ISSN 0012-7353. https://doi.org/10.15446/dyna.v87n213.80676.
This paper addresses the kinematic structure and workspace analysis of a parallel manipulator with linear actuators considering two studies. The first one was based on a morphological synthesis in which a kinematic connections approach was implemented. The set of combinations of joints and links for the desired system and their linkage are illustrated. Finally, the development regarding the conceivable morphology is detailed, providing three linear degrees of freedom between the mobile and fixed platforms. The second study presented the dimensional synthesis of the manipulator, considering a workspace required and an input transmission index. The geometrical design was based on the maximum inscribed workspace volume; the cylindrical shape radius inscribed on a workspace intersection is also exemplified. The geometric determination of the workspace for the manipulator was demonstrated using computer-aided design. A design result of the Delta as checked with the stiffness and condition indices.
Palabras clave : dimensional synthesis; kinematics design; morphological synthesis; parallel manipulator; workspace.