Resumen

MARQUES-COSTA, Robson et al. Analysis of the quality of the welding process in the exchange of component of BGA technology. Rev.fac.ing.univ. Antioquia [online]. 2016, n.78, pp.55-61. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.n78a07.

In recent years, many efforts have been expended by companies in the search for technological improvement of their products by adding features such as lightweight materials, reduced size and high levels of performance at the lowest cost, to meet a worldwide demand in this regard. This article aimed to conduct an analysis of the quality of the Reflow of soldering in exchange of component of BGA technology. The methods and techniques used were the qualitative-quantitative approach, conducted by the case study technique in the welding process of the BGA component by collecting (cross section and X-ray) and data analysis (alignment, cracks and voids) within the process. The achieved results showed that the Reflow welding process in the exchange of BGA component meets the criteria for acceptance of international standards IPC -A - 610E and IPC 7095B. This fact leads to the inference that the quality of the process in question may reflect in better conditions and cost competitiveness for the investigated organization.

Palabras clave : Quality in the process; Reflow soldering; BGA component; cross section; cracks; voids.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )