SciELO - Scientific Electronic Library Online

 
vol.34 número1Obtención de un concreto autocompactante empleando adiciones de escoria de carbón finamente molida índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ingeniería y Desarrollo

versión impresa ISSN 0122-3461versión On-line ISSN 2145-9371

Resumen

HERRERA DELGADO, Anderson; JAIMES SANCHEZ, Iván  y  QUIROGA MENDEZ, Jabid. Experimental study on failures in spur gears caused by misalignment, eccentricity and broken teeth. Ing. Desarro. [online]. 2016, vol.34, n.1, pp.1-23. ISSN 0122-3461.

In this paper is presented a study developed to monitor spur gears exposed to different kinds of failures such as broken teeth (incipient, intermediate and severe), angular misalignment and eccentricity. For every study cases RMS, crest factor and Kurtosis in the time domain are obtained and the spectrum in the frequency domain. The tests were developed in a test bed designed and built specifically to emulate fault conditions. The results obtained in the time domain shows up that the RMS value and the Crest Factor reveal a consistent behavior with the fault severity. Additionally, experimental results shown that the Kurtosis value barely identified consistently the failure caused by eccentricity.

Palabras clave : Spur Gears Failures; RMS; Crest Factor; Kurtosis; Spectrum.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons