Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Tecciencia
versión impresa ISSN 1909-3667
Resumen
SANCHEZ-RIOS, Carlos Andrés; GRACIANO-URIBE, Jonathan; VELEZ GARCIA, Sebastián y HINCAPIE-ZULUAGA, Diego Andrés. Comparative Analysis between a Discrete Spiral Chamber and a Continuous Spiral Chamber via ANSYS. Tecciencia [online]. 2017, vol.12, n.23, pp.25-32. ISSN 1909-3667. https://doi.org/10.18180/tecciencia.2017.23.4.
Hydraulic turbines have been elements of utmost importance to meet the energy needs of communities worldwide. These are used with elements that improve the flow behavior of water to the turbine so that its energy benefits are improved. Spiral chambers are circular elements where their cross-section is constantly changing and are used in reaction turbines, such as Francis turbines. Their main function is to distribute evenly the fluid into the impeller inlet. This paper sought to use engineering simulation tools (ANSYS - CFX) to compare behavior and performance from a discreet continuous spiral chamber in a virtual environment under the same physical operating conditions, providing a comparative view of the performance present between the two manufacturing methods of spiral chambers.
Palabras clave : Spiral chamber; Reaction Turbine; ANSYS - CFX; Francis Turbine Micro Generators; Hydrodynamic Simulation; Blade Position; Kaplan Turbine.