SciELO - Scientific Electronic Library Online

 
vol.74 número151PROCESO DE FUNDICIÓN EN ESPUMA PERDIDA PARA LA FABRICACIÓN DE AUTOPARTES índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183

Resumen

GIL, EDWIN  y  CASTRILLON, ELKIN. ELIMINATION OF "INCONSISTENCIES" OBSERVED IN THE DESIGN OF T SECTIONS OF STRUCTURAL CONCRETE SUBMITTED TO ULTIMATE FLEXURE. Dyna rev.fac.nac.minas [online]. 2007, vol.74, n.151, pp.5-14. ISSN 0012-7353.

For the determination of the flexure capacity of concrete sections different algorithms according to the section form are set out. Naaman [5] observes an "inconsistency" in the design of T sections, proposes an adjustment to the expressions given in previous specifications, that are adopted in some of the recent design codes, determining variations in the results, such as bending moments significantly smaller than ones obtained with previous specifications. These results have created restlessness among other authors. In this paper the "inconsistency" observed by Naaman [5] is analyzed and a general adimensional analysis is proposed to eliminates the "observed inconsistency" and find the correct solution of the problem within the established specifications.

Palabras clave : Naaman; Castrillón; structural concrete; T Sections; Eje neutro; Equivalent distribution of stress; AASHTO LRFD; AASHTO Estándar; NSR 98.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons