Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
Revista Facultad de Ingeniería Universidad de Antioquia
versão impressa ISSN 0120-6230
Resumo
BAUTISTA-RUIZ, Jorge Hernando; OLAYA-FLOREZ, Jhon Jairo e APERADOR-CHAPARRO, Willian Arnulfo. Biocompatibility of bismuth silicate coatings deposited on 316L stainless steel by sol-gel process. Rev.fac.ing.univ. Antioquia [online]. 2017, n.84, pp.27-34. ISSN 0120-6230. https://doi.org/10.17533/udea.redin.n84a04.
Bismuth silicate, (BSO) thin films have been fabricated by sol-gel process. The stable sol was synthesized by using bismuth nitrate (III) pentahydrate and tetraethyl orthosilicate (TEOS). The films were deposited by spin-coating at 1500 rpm on Stainless Steel 316L. The films were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) besides the measured of the films thickness. This study aimed to evaluate the cell adhesion and cellular proliferation of osteoblast cells on BSO thin films and substrate 316L by MTT assay. It is concluded that the growth of osteoblasts is homogeneous in the surface of the coatings indicating that the medium offered by the films does not present active cytotoxicity and exceed in large number the level of cellular growth compared to Stainless Steel.
Palavras-chave : MTT assay; bismuth silicate films; sol-gel; biocompatibility.