SciELO - Scientific Electronic Library Online

 
 número103On the issue of automatic form accuracy during processing on CNC machinesLiterature review of deploying small transmitters on a spectrum sharing scheme índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Revista Facultad de Ingeniería Universidad de Antioquia

versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844

Resumo

VANEGAS-JARAMILLO, Juan David; CRUZ-RIANO, Luis Javier  e  PATINO-ARCILA, Iván David. Fragmentation model for tensile behavior of intermingled hybrid composites and optimal mixing ratio. Rev.fac.ing.univ. Antioquia [online]. 2022, n.103, pp.96-115.  Epub 21-Fev-2022. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.20210423.

A numerical fragmentation model is proposed to predict the mechanical response of intermingled, unidirectional hybrid composites under tensile loads. The model is based on a previously developed for unidirectional composites considering the critical number of fiber breaks and the correction of the fiber-matrix interfacial strength. Hybrids comprising two reinforcements are considered, and the energetic contribution of reinforcements is evaluated during the damage process. Additionally, the pseudo-ductile strain, yield strength, and the level of degradation of each reinforcement are estimated. The present model is compared with a progressive failure model and micromechanical finite element simulations, obtaining some similarities in the stress-strain behavior. Results show that both low elongation and high elongation fiber sub-composite experience a linear tensile response where fibers remain intact (IF), and fragmentation (FM) where breaking appears. The sliding/separation phenomenon (SS) occurs in one of the sub-composites when crack saturation is obtained, and failure occurs when the other one undergoes the crack saturation. Results also show that the IF, FM, and SS phenomena are conditioned by the fiber mixing ratio, α. The model allows estimating the optimal value of α for which the highest pseudo-ductile strain and hybrid effect are reached.

Palavras-chave : Polymer; composite materials; mechanics; fibers; mathematical models.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )