Resumo

GARZON, Andrés Orlando et al. Production and structural, electrical and magnetic characterization of a composite material based on powdered magnetite and high density polyethylene. Rev. acad. colomb. cienc. exact. fis. nat. [online]. 2017, vol.41, n.159, pp.154-167. ISSN 0370-3908.  https://doi.org/10.18257/raccefyn.422.

This work describes the production and characterization of a composite material based on magnetite filled HDPE, which is commonly known for its magnetic properties. Composites of this kind are used in different applications such as microwave absorption, transducers and biomedical applications like drug delivery, organs tagging, etc. The samples were produced according to different volume ratios of magnetite and HDPE. The semiquantitative analysis conducted by XRD revealed the presence of hematite within the mineral magnetite used as a filler in the composites. The crystallinity degree was calculated through X-ray diffraction tests. The XRD results showed how there is an amorphous-crystalline transition due to the magnetite increasing content. The crystallinity percent (χc) for samples filled with 40% of magnetite volume was 90% while the (χc) for samples filled with 10% of magnetite volume was 80%. Which may be related to the increased magnetite particles into the plastic matrix for reinforcement contents up to 30% by volume, as evidenced in the images obtained through scanning electron microscopy (SEM). The samples were electrically characterized through volume resistivity measurements and electric polarization. The results showed that for ratios less than the 20% of magnetite there is no substantial reduction in the resistivity of the composite samples compared to the unfilled HDPE samples, but for magnetite ratios above 30% the composite samples showed a substantial reduction of six orders of magnitude in their volumetric resistivity. The electric polarization showed how the composite material undergoes a transition, going from an insulating material (for samples with 10% of magnetite volume) to a resistive material where the current and voltage are in phase (for samples with 30% and 40% of magnetite volume). The magnetization curves showed that the saturation magnetization (from 17,3 to 60,5 emu/g) and remanence (from 0,94 to 5 emu/g) increase in samples with high magnetite contents. The presence of the hematite phase in the samples could have affected the magnetization saturation and the remanence values in the hysteresis curves. Magnetization curves as a function of temperature showed the Verwey samples transition around the 120K and confirmed that the magnetization increases as the magnetite volume within the matrix increases. © 2017. Acad. Colomb. Cienc. Ex. Fis. Nat.

Palavras-chave : High density polyethylene; Magnetite; Plastic composites, Structural properties electric properties; Magnetic properties.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )