SciELO - Scientific Electronic Library Online

 
vol.11 número21Need for Review of the Loads and Partial Safety Factors of the NSR-10 for the Design of Structures to Withstand Wind EffectsSeismic Data Compression Using 2D Lifting-Wavelet Algorithms índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniería y Ciencia

versão impressa ISSN 1794-9165

Resumo

VASQUEZ HERNANDEZ; BOTERO BOTERO, Luis Fernando  e  CARVAJAL ARANGO, David. Fabrication of Compressed Earth Blocks with the Addition of Construction and Demolition Debris Instead of the Conventional Rocky Aggregate. ing.cienc. [online]. 2015, vol.11, n.21, pp.197-220. ISSN 1794-9165.  https://doi.org/10.17230/ingciencia.11.21.10.

The present article suggests an alternative that contributes to give a step towards the continuos cycle of Recycling-Fabrication-Use-Recycling from considering the possibility of understating debris as a raw material for new processes, thus reducing the extraction of materials. To that end this article suggests the fabrication of compressed earth blocks from the use of the resulting earth from construction and demolition (C&D) debris as aggregates, this way substituting the use of traditional aggregates completely. Blocks with RCD addition comply with the physical and mechanical specifications established by the Colombian technical standard.

Palavras-chave : compressed earth block; construction and demolition waste; sustainability; cycle of materials; environmental impact; resources management.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )