SciELO - Scientific Electronic Library Online

 
vol.73 número150ETHANOL PRODUCCTION OF BANANA SHELL AND CASSAVA STARCH índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

DYNA

versão impressa ISSN 0012-7353

Resumo

RENGIFO ABADIA, CLAUDIA MARCELA; ARROYAVE ZULUAGA, JUAN MANUEL  e  SIERRA RESTREPO, CARLOS MARIO. ANALISYS OF CASING DRILLING’S HYDRAULIC. Dyna rev.fac.nac.minas [online]. 2006, vol.73, n.150, pp.5-19. ISSN 0012-7353.

In this study some models for calculating the annular pressure losses in casing drilling are presented. The conventional one as well as a model developed by Wei and Diaz are included. The models try to show the effect of some parameters such as well geometry, eccentricity and rotation on the hydraulics of this type of drilling. Before the exposition of the models, the basic concepts and the Bottom Hole Assembly used by the technique are presented. In order to study these models a Visual Fortran 6.0 routine was made. Additionally, some graphs, allowing to analyze the theoretical concepts and to observe the effect of drilling conditions on the hydraulic design, were constructed.

Palavras-chave : Casing Drilling; Flow helical; Rotation; Eccentricity; Hydraulic; Annular losses of pressure.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons