SciELO - Scientific Electronic Library Online

 
vol.74 número152EVALUATION OF THE INFLUENCE OF THE PARTICLE SIZE AND THE TIME OF THERMAL TREATMENT ON THE PHYSICAL-MECHANICAL CHARACTERISTICS OF A COMPOSITE OF SINTERIZED ALUMINA INFILTRATED WITH A LANTHANUM GLASS(Ti,Al)N COATINGS ON AISI 4140 BY R.F. SPUTTERING índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

MARTINEZ T., HADER VLADIMIR  e  CRUZ R, LUIS JAVIER. NUMERIC SIMULATION OF SLIDING CONTACT FOR THE SYSTEM 2117-T4 / X19CrNi17.2 IN MECHANICAL UPSETTING. Dyna rev.fac.nac.minas [online]. 2007, vol.74, n.152, pp.167-180. ISSN 0012-7353.

A study on the sliding contact between a 2117-T4 aluminum alloy and a stainless steel X19CrNi17.2 (AISI 431) is reported. This interaction is important for the different operations of plastic deformation. Considering the initial geometry of the samples, i.e. 7.14mm of length and 4.76mm of diameter, it was selected a cylinder upsetting test for the determination of tribological conditions. For the experimental conditions used, the Coulomb friction coefficient found at the sample-compression plate interphase, was between 0.02 and 0.03.

Palavras-chave : Cylinder upsetting; tribology; friction coefficient; numeric simulation.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons