SciELO - Scientific Electronic Library Online

 
vol.74 número153APLICATION OF MATRIX ENGINEERING IN THE FORTIFICATION OF MANGO (VAR. TOMMY ATKINS) WITH CALCIUM índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

GOMEZ G, JORGE I.  e  ROMERO, JAVIER. A VIEW OF THE STANDARS ON GEOMETRICAL AND DIMENSIONING TOLERANCING OF FEATURES IN SPANISH AMERICA. Dyna rev.fac.nac.minas [online]. 2007, vol.74, n.153, pp.7-18. ISSN 0012-7353.

This paper presents the level reached in the Spanish America regard Geometrical Dimensioning and Tolerancing -GDT- of mechanical drawings. To pursue this goal it is shown the countries that has homologated at least one of the ISO standards on this subject. It is also analysed the amount and the translation quality of the ISO standards regard GDT. It follows from this article that less than half of the countries have standards on this matter. Also, that the quality of the norms in most of countries are difficult to use and non reliable.

Palavras-chave : Geometrical dimensioning and tolerancing; Standard; Spanish America.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons