SciELO - Scientific Electronic Library Online

 
vol.75 issue156NEURAL NETWORK FOR FAULT CLASSIFICATION IN TRANSMISSION LINES BASED ON OSCILOPERTUBOGRAPHY RECORDSPROTON EXCHANGE MEMBRANE FUEL CELLS EVALUATION WITH Pt-M (M= Sn, Ru and Ir) ANODES FOR H2 AND CO OXIDATION author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353On-line version ISSN 2346-2183

Abstract

COPETE, HENRY; AMELL, ANDRÉS  and  CADAVID, FRANCISCO. NUMERICAL SIMULATION OF HIGH SPEED COMBUSTION CHAMBER USING TWO FUEL INJECTION CONFIGURATIONS. Dyna rev.fac.nac.minas [online]. 2008, vol.75, n.156, pp.109-120. ISSN 0012-7353.

In this work, it was simulated the combustion process in a high velocity chamber, which uses highly preheated air and methane as fuel. The simulation was carried out with FLUENT and the grid was drawn with GAMBIT. These programs were used as designing tool to predict the performance of the combustion system when two different types of burners are tested, and there is not swirl generation. The first type of burner the fuel is injected axially. In the second one the fuel is injected radially. The models were: k - e for turbulence, P1 for radiation and PDF-Mixture Fraction for combustion processes. The numerical results show that radial injection of fuel presents a better performance than axial injection with regard to combustion efficiency, also it is achieved a more complete combustion due to the better mix between air and fuel

Keywords : High velocity; Combustion; Simulation; Non-premixed flame; FLUENT; Gas injection.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License