SciELO - Scientific Electronic Library Online

 
vol.76 issue158CEMENT CLINKER GRINDING: EVALUATION OF MILL SPIN SPEED, RESIDENCE TIME AND GRINDING MEDIA LOADAMMONIA: A REVIEW OF CONCENTRATION AND EMISSION MODELS IN LIVESTOCK STRUCTURES author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353On-line version ISSN 2346-2183

Abstract

HIGUERA COBOS, OSCAR FABIÁN; FLOREZ GARCIA, LUIS CARLOS  and  PENA BALLESTEROS, DARIO YESID. STUDY OF CHEMICAL POLISHING PROCESS JEWELLER`S PIECES. Dyna rev.fac.nac.minas [online]. 2009, vol.76, n.158, pp.79-88. ISSN 0012-7353.

In this investigation work the fundamental aspects were studied at electrochemical, kinetic and thermodynamic level of the process of chemical polishing (Bombing process) with the purpose of determining the favorable conditions and then standardization of the process of chemical polishing. The “Bombing“ process behavior of 24 and 18 carat gold has been investigated using cyclic voltammetry techniques using a rotating disc electrode. Electrochemically was determined the best operation conditions for the process of chemical polishing of jeweler's pieces: 0.1M NaCN, 0.95M H2O2, 0 rpm and 85ºC

Keywords : 24 carat gold; 18 carat gold; hydrogen peroxide; chemical polishing; cyanide; voltammetry cyclic; rotating disc electrode (RDE).

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License