SciELO - Scientific Electronic Library Online

 
vol.76 issue160OPTIMIZATION OF THE IONIC TRANSPORT RELATED PROPERTIES OF CONCRETE AND SIMULATION OF THE ASTM C1202 TESTRESIDUAL ELASTIC STRAIN OF AISI 304 STAINLESS STEEL SHEETS COVERED WITH A TITANIUM NITRIDE THIN FILM DEPOSITED BY PVD-MAGNETRON SPUTTERING author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353On-line version ISSN 2346-2183

Abstract

MONTOYA, JUAN E.; VARGAS, FABIO  and  CALDERON, JORGE A.. PROTECTIVE CAPACITY EVALUATION OF THERMAL SPRAYED Ni-SiC y Ni-Co-W COATINGS. Dyna rev.fac.nac.minas [online]. 2009, vol.76, n.160, pp.195-206. ISSN 0012-7353.

The behavior of thermal sprayed nickel, nickel-cobalt-tungsten and silicon carbide / nickel coatings as coatings to protect steel substrates against corrosion in aggressive environment was studied. In spite of the porosity exhibited by these coatings the obtained results show that they can isolate and protect the substrate against corrosive substances because the pores are not connected and then the diffusion phenomena is more difficult. The results show that the protection capacity of three-layer (nickel / nickel-cobalt-tungsten / silicon carbide - nickel)coatings is higher that those the bi-layer (nickel / nickel-cobalt-tungsten) and the protection capacity of bi-layer coating is higher that monolayer (nickel) coating.

Keywords : coatings composites; corrosion; nickel; thermal spray.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License