SciELO - Scientific Electronic Library Online

 
vol.77 número162ABRASIVE WEAR OF ROTARY PLOW BLADES IN A SANDY LOAMS SOILFATIGUE BEHAVIOR OF SAE 4140 STEEL WITH HIGH SURFACE ROUGHNESS IN A CORROSIVE ENVIRONMENT índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

GOMEZ, MARYORY; LOUSA, ARTURO  e  ESTEVE, JOAN. EVALUATION OF TRIBOLOGICAL AND MECHANICAL PROPERTIES OF CrC COATINGS DEPOSITED BY R.F. MAGNETRON SPUTTERING. Dyna rev.fac.nac.minas [online]. 2010, vol.77, n.162, pp.115-124. ISSN 0012-7353.

This paper presents the results obtained with a series of CrC coatings deposited by means of r.f magnetron sputtering, which presented carbon contents in the range between 25‑58 % as it is shown by EDS measurements. Hardness values of these coatings were between 15 and 24 GPa, being the hardest values in the samples with carbon content in the 39‑53 % range. A correlation has been found between carbon content and friction coefficient values which are in the 0,70 to 0,15 range, obtaining these last values for coatings with carbon excess. Wear behavior under dry sliding tests showed also a marked dependence with carbon content. The best results of wear were obtained for the highest carbon content coatings.

Palavras-chave : Hard coatings; chromium carbide; r.f. magnetron sputtering; tribological properties; mechanical properties.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons