Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
DYNA
versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183
Resumo
LARA V., LUIS A.; BRITO, JOSÉ L. V. e AVILA, SUZANA M.. VIBRATION CONTROL IN A GERBER BEAM USING TUNED MASS DAMPERS. Dyna rev.fac.nac.minas [online]. 2010, vol.77, n.164, pp.119-129. ISSN 0012-7353.
One of the most common strategies in structural control is the installation of Tuned Mass Dampers (TMD). A TMD basically consists of a mass, a spring and a damper which are connected to the structure. Its frequency can be tuned to a particular value with the objective of making the damper absorb part of the input energy, decreasing the structural peak response caused by the dynamic load. The present paper analyzes numerically, with the help of the software ANSYS, the most efficient number and position of Tuned Mass Dampers attached to a metallic Gerber beam. TMD's properties are designed according to Den Hartog's and Jangid's expressions. The obtained results demonstrated reductions in the beam's dynamic maximum response above of 80% in the cases where the excitation was harmonic and above 45% in the case that the applied load in the beam was a random load white noise load.
Palavras-chave : Dynamic of structures; vibration control; metallic beams; tuned mass dampers.