SciELO - Scientific Electronic Library Online

 
vol.78 número168MOTION DETECTION ON FIXED CAMERAS SUBJECT TO VIBRATIONELECTRICAL PROPERTIES OF Cr/CrN NANO-MULTILAYERS PRODUCED BY THE UNBALANCED MAGNETRON SPUTTERING TECHNIQUE índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

REYES-ORTIZ, OSCAR JAVIER; ALVAREZ-LUGO, ALLEX E.  e  BOTELLA-NIETO, RAMÓN. STUDY OF A HOT ASPHALT MIXTURE RESPONSE BASED ON ENERGY CONCEPTS. Dyna rev.fac.nac.minas [online]. 2011, vol.78, n.168, pp.45-52. ISSN 0012-7353.

The main objective of the research reported in this paper is to determine the response of a hot mix asphalt (HMA) in terms of both the tensile strength and energy parameters (based on the assessment of the force-displacement curve) as potential tools for improving the HMA mixture design. The HMAs analyzed were fabricated using a 60-70 penetration asphalt binder, dense-graded aggregate, mineral filler, and different types and contents of mineral filler replacements (i.e., lime, cement, and fly ash). The indirect tensile test was conducted to determine both the HMA tensile strength and force-displacement curve, which allowed for the computation of the HMA toughness as well as the energies involved in the process before and after reaching the tensile strength. Corresponding results suggest that the replacement of mineral filler by cement, lime, and fly ash modified the HMA response in terms of both the tensile strength and energy parameters. In addition, analysis of the energy parameters discussed proved to be useful for determining the optimum mineral filler content of HMA. Consequently, analysis of these energy parameters can benefit the HMA mixture design process.

Palavras-chave : Toughness; hot mix asphalt (HMA); indirect tensile test; tensile strength; mineral filler; mixture design.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons