SciELO - Scientific Electronic Library Online

 
vol.78 número168OPTIMIZACIÓN DE LA ETANÓLISIS BÁSICA DEL ACEITE DE RICINO USANDO LA METODOLOGÍA DE LA SUPERFICIE DE RESPUESTADISEÑO E IMPLEMENTACIÓN DE UN EMULADOR DE PILA DE COMBUSTIBLE PEM PARA COMPORTAMIENTO ESTÁTICO Y DINÁMICO índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183

Resumen

VASQUEZ SARRIA, NANCY; RODRIGUEZ VICTORIA, JENNY; TORRES LOZADA, PATRICIA  y  MADERA PARRA, CARLOS. PERFORMANCE OF A CONTACT STABILIZATION PROCESS FOR DOMESTIC WASTEWATER TREATMENT OF CALI, COLOMBIA. Dyna rev.fac.nac.minas [online]. 2011, vol.78, n.168, pp.98-107. ISSN 0012-7353.

The contact stabilization process has been applied in full-scale plants which treat domestic wastewater. The main advantage of this process is the short hydraulic retention time (HRT) in the contact reactor (CR), allowing treatment volumes significantly lower than in conventional activated sludge processes. This paper presents an analysis of the influence of the HRT and sludge recycle rate (r), on the performance of a contact stabilization process to remove organic matter and solids from the domestic wastewater of the city of Cali (Colombia). The research was carried out at Cañaveralejo Wastewater Treatment Plant (C-WWTP) facilities. The contact stabilization process was assessed at a pilot-scale unit treating raw wastewater influent to the C-WWTP. The HRT varied between 0.84 to 1.66 h in the contact reactor and 2.56 to 4.65 h in the stabilization reactor (SR). The evaluation of HRT was carried out with different r varying between 40 and 100%. The operational conditions that allowed for us to obtain the best performance in terms of organic load removal (14.05 kgCOD.d-1), with removal efficiencies of chemical oxygen demand (COD), biological oxygen demand (BOD5), and total suspended solids (TSS) of 86, 87, and 82 %, respectively, were an HRT of 0.84 h in CR, and 4.11 h in SR, with a sludge recycle rate of 40%. In order to guarantee this performance, average values of sludge retention time (SRT) of 6 d; a volumetric organic load (VOL) of 2.13 kgBOD5.(m3.d) -1; a food microorganism relation (F/M) of 0.89 kgBOD5.(kgVSS.d)-1; and a mixed liquor volatile suspended solids (MLVSS) of 1125 mg.L-1 in CR, and 3173 mg.L-1 in SR, must be maintained.

Palabras clave : Activated sludge; contact stabilization; organic matter removal; secondary wastewater treatment.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons