SciELO - Scientific Electronic Library Online

 
vol.78 número170ETHANOL PRODUCTION FROM PAPER SLUDGE USING KLUYVEROMYCES MARXIANUSMÖSSBAUER AND XRD ANALYSIS OF CORROSION PRODUCTS OF CARBONATED ALKALI-ACTIVATED SLAG REINFORCED CONCRETES índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

CASTILLEJO, FABIO; MARULANDA, DIANA; RODRIGUEZ, OLIVO  e  OLAYA, JHON. ELECTRICAL FURNACE FOR PRODUCING CARBIDE COATINGS USING THE THERMOREACTIVE DEPOSITION/DIFFUSION TECHNIQUE. Dyna rev.fac.nac.minas [online]. 2011, vol.78, n.170, pp.192-197. ISSN 0012-7353.

In this work, the design of an electrical furnace for producing transition metal-based hard coatings using the thermo-reactive deposition and diffusion (TRD) technique is described. Performance of the system was tested through production of vanadium carbide (VC) and niobium carbide (NbC) coatings on steel AISI D2. X-ray diffraction (XRD) and optical microscopy techniques were used to study phase formation and microstructure, respectively. Hardness was determined by using Knoop microhardness measurements. XRD results showed the presence of VC and NbC, and as MEB results clearly show, the formation of regular thickness coatings. The results obtained allow for assessing that the designed and built furnace fulfills the requirements of the TRD technique for obtaining different types of hard coatings.

Palavras-chave : Thermoreactive deposition and diffusion; coatings; VC; NbC.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons