SciELO - Scientific Electronic Library Online

 
vol.78 número170DISEÑO DE UN HORNO ELÉCTRICO PARA PRODUCIR RECUBRIMIENTOS DE CARBUROS METÁLICOS UTILIZANDO LA TÉCNICA DE DEPOSICIÓN POR DIFUSIÓN TERMORREACTIVAMODELADO DE UN CEPILLO OSCILATORIO PARA BARRIDO DE CALLES EN ROTACIÓN LIBRE índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183

Resumen

APERADOR, WILLIAN; BAUTISTA, JORGE  y  VERA, ENRIQUE. MÖSSBAUER AND XRD ANALYSIS OF CORROSION PRODUCTS OF CARBONATED ALKALI-ACTIVATED SLAG REINFORCED CONCRETES. Dyna rev.fac.nac.minas [online]. 2011, vol.78, n.170, pp.198-203. ISSN 0012-7353.

Steel bars embedded in an alkali-activated slag (AAS) concrete have been exposed (after curing for 28 days) to an accelerated carbonation chamber (3 % CO2, 65 % relative humidity (RH), and 25 ºC temperature) and to a laboratory environment (0.03 % CO2, 65 % RH, and 25 ºC). Ordinary Portland cement (OPC) was also tested for comparative purposes and exposed to identical experimental conditions. Corrosion products generated at the steel/concrete interface were characterized using Mössbauer spectrometry and the X-ray diffraction (XRD) technique. The main compounds were magnetite (Fe3O4), wuestite (FeO), and goethite (a-FeOOH). The morphology of corrosion products was analyzed using the scanning electron microscopy technique (SEM).

Palabras clave : carbonation; corrosion; magnetite; wuestite; alkali-activated cement; Portland cement; steel reinforcement.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons