SciELO - Scientific Electronic Library Online

 
vol.80 número177EVALUACIÓN DEL COMPORTAMIENTO IN VITRO DE RECUBRIMIENTOS DE HIDROXIAPATITA DEPOSITADOS MEDIANTE PROYECCIÓN TÉRMICA POR COMBUSTIÓN OXIACETILÉNICA SOBRE UN SUSTRATO DE Ti6Al4VMEJORAMIENTO DE LA EFICIENCIA ENERGÉTICA EN LA INDUSTRIA DEL CEMENTO POR PROCESO HÚMEDO A TRAVÉS DE LA IMPLEMENTACIÓN DEL SISTEMA DE GESTIÓN INTEGRAL DE LA ENERGÍA índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353

Resumen

MATOS, JOSÉ et al. EVALUATION OF MICROMAGNETIC LEVEL OF TENSILE STRESS IN WIRES OF FLEXIBLES RISERS. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.177, pp.108-114. ISSN 0012-7353.

This paper reports the use of a non-destructive method that uses micromagnetic parameters to measure the stress in a wire during a tensile test in different load levels. This wires forms the structural armature of flexible risers. In this work was considered the parameters of the hysteresis curve based on Harmonic Analysis of the Tangential Magnetic Field Strength, Analysis of Barkhausen Noise Signals and the Analysis of Incremental Permeability Signals during a tensile test with load controlling. A linear regression was used to analyze the data and to correlate with the know data of applied load of the test machine. The results showed an excellent relation between the obtained measures of the micromagnetic parameters and the load applied in the sample, demonstrating a potentiality of the technique in this kind of applications.

Palabras clave : stress characterization; micromagnetic methods; ferromagnetism.

        · resumen en Español     · texto en Español     · Español ( pdf )