SciELO - Scientific Electronic Library Online

 
vol.80 número177IN VITRO EVALUATION OF OXY-FUEL THERMAL SPRAYED HYDROXYAPATITE COATINGS ONTO Ti6Al4V SUBSTRATESENERGY EFFICIENCY IMPROVEMENT IN THE CEMENT INDUSTRY BY WET PROCESS THROUGH INTEGRAL ENERGY MANAGEMENT SYSTEM IMPLEMENTATION índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

MATOS, JOSÉ et al. EVALUATION OF MICROMAGNETIC LEVEL OF TENSILE STRESS IN WIRES OF FLEXIBLES RISERS. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.177, pp.108-114. ISSN 0012-7353.

This paper reports the use of a non-destructive method that uses micromagnetic parameters to measure the stress in a wire during a tensile test in different load levels. This wires forms the structural armature of flexible risers. In this work was considered the parameters of the hysteresis curve based on Harmonic Analysis of the Tangential Magnetic Field Strength, Analysis of Barkhausen Noise Signals and the Analysis of Incremental Permeability Signals during a tensile test with load controlling. A linear regression was used to analyze the data and to correlate with the know data of applied load of the test machine. The results showed an excellent relation between the obtained measures of the micromagnetic parameters and the load applied in the sample, demonstrating a potentiality of the technique in this kind of applications.

Palavras-chave : stress characterization; micromagnetic methods; ferromagnetism.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )