Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
DYNA
versión impresa ISSN 0012-7353
Resumen
APERADOR CHAPARRO, WILLIAN; RAMIREZ MARTIN, CARLOS y VERA LOPEZ, ENRIQUE. SYNERGY BETWEEN EROSION-CORROSION OF STEEL AISI 4140 COVERED BY A MULTILAYER TICN / TINBCN, AT AN IMPACT ANGLE OF 90°. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.178, pp.101-108. ISSN 0012-7353.
The aim of this work is the study of the effect of corrosion erosion on wear for [TiCN / TiNbCN] n multilayer coatings on AISI 4140 steel substrates. We have grown [TiCN/TiNbCN] n multilayered via reactive RF (radio frequency) magnetron sputtering technique in which systematically the bilayer period (L) and the bilayer number (n were varied), maintaining the total thickness of the coatings constant (~ 3 mm). The multilayers were evaluated and compared for corrosion, erosion and erosion-corrosion at an impact angle of 90º in a solution of 0.5 M NaCl and silica which simulates a marine environment, analyzing the effect of the number of bilayers on the corrosion resistance of these coatings. Polarization curves were conducted at rest potential. After the polarization experiments the specimens were analysed by scanning electron microscopy. The results show good performance of the multilayer systems in dynamic corrosion systems and erosion-corrosion, furthermore the enhancement of wear is due to the fact that the polarizations curves move towards areas where current densities decrease by increasing the bilayer number.
Palabras clave : Wear; multilayer system; synergy; impact angle of 90º.