SciELO - Scientific Electronic Library Online

 
vol.80 número179SIMILARITY METRICS APPLIED TO IMAGE ANALYSIS OF PHOTOELASTICITYA SIMULATION-OPTIMIZATION APPROACH BASED ON EPSO FOR THE VEHICLE ROUTING PROBLEM WITH STOCHASTIC DEMANDS índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

CALDAS FLAUTERO, OSCAR IVÁN et al. CONTROL SYSTEM OF A PLANT EMBEDDED IN FPGA USING HARDWARE IN THE LOOP. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.179, pp.51-59. ISSN 0012-7353.

Rapid prototyping systems are widely used in product development in the different industries. They provide the ability to set up the initial prototypes, test them under real conditions, and optimize them time- and cost-effectively, without extensive hardware development. Following the Hardware-in-the-loop concept, the operation conditions of a real system can be emulated by means of a mathematical model, embedded in an electronic device. This paper shows a thermal plant implementation in a FPGA, which emulates the real behavior and allows to assess the scope and benefits of HIL technique. On the other hand, a PID controller was designed in LabView® to regulate the dynamics of the embedded plant by serial communication. A comparison was made to validate the system performance based on the design parameters.

Palavras-chave : Control system; Hardware-in-the-Loop; FPGA.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )