SciELO - Scientific Electronic Library Online

 
vol.80 issue179FERRITE SYNTHESIS OF Pb, Cd AND Mn HYDROCHEMICAL ROUTE: EFFECT OF ANION AND THE FLOW OFSTEAM OXIDATION IN STAINLESS STEEL AISI 317 AT 700 AND 750 °C author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Abstract

PEREZ CARRION, MARÍA TERESA et al. POTENCIAL USE OF SEWAGE SLUDGE ASH AS A FINE AGGREGATE REPLACEMENT IN PRECAST CONCRETE BLOCKS. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.179, pp.142-150. ISSN 0012-7353.

This paper is focused on the assessment of sewage sludge ash added on precast concrete blocks, therefore, based on a matrix of Portland cement with particular characteristics (dry consistency). A pilot experience was performed, by manufacturing commercial concrete blocks at an industrial local plant, using mixes in which sand replacements of 5, 10 and 15% by sewage sludge ash, being the results compared with reference concrete block (without sand replacement). The tests applied are prescriptive for marketing as European regulations (CE marking), which will also let to test the physical and mechanical properties of concrete. The results are promising: these wastes could be commercialized, because the improvement of the characteristics of the concrete blocks such as compressive strength, and consequently to reduce a large volume of a material typically used as a raw material and by means of the valorization instead of sending to landfill.

Keywords : Waste assessment; mineral admixtures; CE marking.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )