SciELO - Scientific Electronic Library Online

 
vol.80 número182ADVANTAGES AND THERMODYNAMIC LIMITATIONS OF THE EXPERIMENTAL SORPTION ISOSTERIC METHODOUTLIER DETECTION IN ROTATING MACHINERY UNDER NON-STATIONARY OPERATING CONDITIONS USING DYNAMIC FEATURES AND ONE-CLASS CLASSIFIERS índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

CAMACHO-TAUTA, JAVIER FERNANDO; REYES-ORTIZ, OSCAR JAVER  e  JIMENEZ ALVAREZ, JUAN DAVID. COMPARISON BETWEEN RESONANT-COLUMN AND BENDER ELEMENT TESTS ON THREE TYPES OF SOILS. Dyna rev.fac.nac.minas [online]. 2013, vol.80, n.182, pp.163-172. ISSN 0012-7353.

The bender element (BE) test is used in laboratory to obtain the shear wave velocity of soils. Different execution and interpretation techniques have been proposed. However, there is not a specialized technique with an adequate level of accuracy and reproducibility to be adopted as a standard. Several factors affect the reliability of this method, mainly because of complex phenomena of wave propagation in the small volume of the specimen. Three type of soils were tested by Resonant-Column (RC) and two BE test methods (BETD and BEFD). Results suggest that in non-plastic soils the stiffness tends to be underestimated compared with the stiffness obtained by the RC test. The BETD method could be affected by the soil plasticity. The frequency domain method (BEFD) had less agreement with respect to the RC test.

Palavras-chave : Bender element; resonant-column test; shear modulus; shear-wave velocity.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )