SciELO - Scientific Electronic Library Online

 
vol.81 número186Películas de nitruro de carbono crecidas por arco catódico en vacío para aplicaciones en hemocompatibilidadEfecto de un defecto superconductor sobre los pares de Cooper de una muestra mesoscópica índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353

Resumen

AMAYA-RONCANCIO, Sebastián et al. Molecular dynamics simulation of nanoindentation in Cr, Al layers and Al/Cr bilayers, using a hard spherical nanoindenter. Dyna rev.fac.nac.minas [online]. 2014, vol.81, n.186, pp.102-107. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v81n186.39190.

Three-dimensional molecular dynamics (MD) simulations of a nanoindentation technique using the hard sphere method for Cr (bcc)  and Al (fcc) thin films and (Cr/Al)n (n=1,2) systems were carried out.  For the model implementation, Morse interatomic potential was used for describing the single crystal interaction and the contact between Cr and Al structures. On the other hand, fixed boundary conditions were used and the repulsive radial potential was employed for modeling the spherical tip, and ideal mechanical properties at 0 K were obtained by simulating load-unload curves. Bilayers presented higher hardness and Young's modulus than Cr and Al layers. Moreover, the region of atoms movement after the unload process shows a continuous parabolic boundary for Al and Cr layers and a discontinuous boundary for the bilayers caused by the interfaces.

Palabras clave : Hardness; Interface; Morse potential; Nanoindentation; Young's modulus.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )