SciELO - Scientific Electronic Library Online

vol.81 número186Model for a vehicle dynamics through a sequence of traffic lightsOccupational injuries in the mining sector (2000-2010). Comparison with the construction sector índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google



versão impressa ISSN 0012-7353


CANAL-MARQUES, André; ORTEGA-VEGA, Maria Rita; CABRERA, José-María  e  FRAGA-MALFATT, Célia de. Alternative methods to attach components in printed circuit boards to improve their recyclability. Dyna rev.fac.nac.minas [online]. 2014, vol.81, n.186, pp.146-152. ISSN 0012-7353.

Printed circuit boards (PCB), which form the basis of the electronics industry, generate wastes that are difficult to dispose of and recycle due to the diversity of their materials and components and their difficult separation. The replacement of Pb-Sn welding for lead-free alloys to attach components in printed circuit boards is an attempt to minimize the problem of Pb toxicity, but it does not change the problem of separation of the components for later reuse and/or recycling. This article presents a review of the environmental problem of printed circuit boards, the initial development of alternative fixation studies, and reliability tests for comparison with conventional boards and commercial systems to validate or serve as a basis for future research, focused on PCB disassembly for recycling. At present, initial studies were performed by using prototypes for visual and functional tests.

Palavras-chave : Printed circuit boards; Welding replacement; Environmental problem; Recyclability.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )