SciELO - Scientific Electronic Library Online

 
vol.81 issue188Structural control using magnetorheological dampers governed by predictive and dynamic inverse modelsEffect of additives on diffusion coefficient for cupric ions and kinematics viscosity in CuSO4-H2SO4 solution at 60°C author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Abstract

LUEVANOS-ROJAS, Arnulfo. Design of boundary combined footings of rectangular shape using a new model. Dyna rev.fac.nac.minas [online]. 2014, vol.81, n.188, pp.199-208. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v81n188.41800.

This paper presents the design of boundary combined footings of rectangular shape using a new model to consider real soil pressure acting on the contact surface of the footing; such pressure is presented in terms of an axial load, moment around the "X" axis and moment around the "Y" axis to each column. The classic model considers an axial load and moment around the transverse axis applied in each column, and when the moments in two directions are taken into account, the maximum pressure throughout the contact surface of the footing is considered the same. The main part of this research is that the proposed model considers real soil pressure and the classic model takes into account the maximum pressure and uniform is considered. It is concluded that the proposed model is more suited to the real conditions and is more economical.

Keywords : boundary combined footings; resultant force; center of gravity; bending moment; bending shear; punching shea.

        · abstract in Spanish     · text in English     · English ( pdf )