SciELO - Scientific Electronic Library Online

 
vol.82 número190Computational simulation of a diesel generator consuming vegetable oil "in nature" and air enriched with hydrogenConvergence analysis of the variables integration method applied in multiobjetive optimization in the reactive power compensation in the electric nets índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

ARIAS-HERNANDEZ, Néstor Alonso; MOLINA-PRADO, Martha Lucía  e  MENESES-FONSECA, Jaime Enrique. A reconstruction of objets by interferometric profilometry with positioning system of labeled target periodic. Dyna rev.fac.nac.minas [online]. 2015, vol.82, n.190, pp.153-159. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v82n190.42616.

A method to extract 3D information using a white light interferometer without using PZT is presented. Instead a positioning system that uses the phase sensitivity of a target periodic is employed. The image treatment realized on the periodic target permits to calculate the relative distance between Mirau objective and object surface. Topographic reconstructions of objects with dimensions of some tenths of millimeters were calculated with an accuracy of approximately 28 nanometers. Theoretical analysis and experimental results are shown.

Palavras-chave : profilometry; optical metrology; surface topography; Mirau interferometer.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )