SciELO - Scientific Electronic Library Online

 
vol.82 número190Inspection of radiant heating floor applying non-destructive testing techniques: GPR AND IRT3D Parametric design and static analysis of the first Spanish winch used to drain water from mines índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

CORES, Alejandro et al. Iron ore sintering. Part 3: Automatic and control systems. Dyna rev.fac.nac.minas [online]. 2015, vol.82, n.190, pp.227-236. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v82n190.44054.

The sintering process involves a large number of parameters, more than 500, each of which exerts a greater or lesser influence and needs to be controlled, within the possible limits, in order to optimise productivity, process stability, and standardise the composition and quality of the sinter produced. To comply with environmental legislation, a pollution control system must monitor the particle matter and gases generated and emitted into the atmosphere by the sinter plant. Automation and control systems are vital tools to assist plant operators in the monitoring of each stage of the sinter production process.

Palavras-chave : Sintering; Automatic and control systems; Environment; Dioxins.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )