SciELO - Scientific Electronic Library Online

 
vol.82 número190Iron ore sintering. Part 3: Automatic and control systems índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

ROJAS-SOLA, José Ignacio  e  MOLINO-DELGADO, Jesús. 3D Parametric design and static analysis of the first Spanish winch used to drain water from mines. Dyna rev.fac.nac.minas [online]. 2015, vol.82, n.190, pp.237-245. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v82n190.47123.

In this paper, we analyze in detail the first Spanish winch used to drain water from mines. It is a privilege of invention designed by Bernave Dombon in 1850. In particular, three-dimensional modeling is performed using software parametric (Catia v5 R21) of each of the elements of the set. Also, after obtaining the 3D model, a static analysis using techniques of Computer-Aided Engineering has been performed, thanks to software of finite element analysis (Simulia Abaqus v6.14-1), based on the analysis of the von Mises stress and displacement. So, the highest stress concentrations occur in the drum shaft and the supporting structure, and that the highest concentration of displacements on the drum shaft too, but the rupture of the elements does not occur in any case, making it a set properly sized.

Palavras-chave : mining industrial historical heritage; winch; computer-aided design; computer-aided engineering; static analysis.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )