SciELO - Scientific Electronic Library Online

 
vol.82 número193Wear resistance of vanadium-niobium carbide layers grown via TRDSolution architecture approach, mechanism to reduce the gap between enterprise architecture and implementation of technological solutions índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

DEVIA-NARVAEZ, Diana Marcela; DUQUE-SANCHEZ, Harold  e  MESA, Fernando. Behavior of coated forming tools with TiAlN coatings grown by Triode Magnetron Sputtering. Dyna rev.fac.nac.minas [online]. 2015, vol.82, n.193, pp.110-116. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v82n193.46760.

This research focusses on tribological analysis of Titanium Aluminum Nitride (TiAlN) coatings deposited by means of Triode Magnetron Sputtering, when used as a protective coating on forming tools. The analysis is carried out from the microstructural properties which directly influence the tribological behavior. It was observed that the predominant wear mechanisms on the surface are delamination and tribo-oxidation; an increase in the useful life of the tool was observed making hard coatings an excellent alternative in the metalworking industry.

Palavras-chave : Delamination; Microestructure; Wear Mechanisms; TiAlN Tribo-Oxidation..

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )