SciELO - Scientific Electronic Library Online

 
vol.83 issue197Validation of an inertial sensor-based platform to acquire kinematic information for human joint angle estimationBurst erasure correction using LDPC codes constructed on base matrices generated by matched groups, nested polygons and superposed circulant matrices author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


DYNA

Print version ISSN 0012-7353

Abstract

YANEZ-CONTRERAS, Pedro et al. Study of the evolution of the residual stress state in thermal barrier coatings sprayed on AISI 304 stainless steel. Dyna rev.fac.nac.minas [online]. 2016, vol.83, n.197, pp.159-165. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v83n197.51150.

Thermal barrier coatings (TBC) were manufactured by thermal spraying of CoNiCrAlY and YSZ powders, which constituted the bond coat (BC) and top coat (TC), respectively. The BC was deposited on stainless steel substrates by a high velocity oxygen fuel (HVOF) system whilst the TC was deposited on the BC by an atmospheric plasma spraying (APS) gun .TBCs were heat treated at 1200 °C for 8 and 16 h in order to determine the evolution of the residual stress state as a function of time. The residual stress profiles were obtained by employing the Modified Layer Removal Method (MLRM) and an adaptation of this for bilayer coatings called Modified Layer Removal Method for Duplex Coatings (MLRMDC). It was observed that as the exposure time was increased, the compressive residual stresses increased, which was more noticeable in the BCs. The TBCs without heat treatment revealed tensile residual stresses.

Keywords : thermal barrier coating; residual stress; modified layer removal method; thermal spraying; Modified Layer Removal Method for Duplex Coatings.

        · abstract in Spanish     · text in English     · English ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License