SciELO - Scientific Electronic Library Online

 
vol.84 número200Study of the dispersion of Cloisite 10A in recycled polyethylene terephtalate by extrusionEvaluation of the stability of a highway slope through numerical modeling índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

HERNANDEZ-MARTINEZ, Alejandro; GARCIA-SOTO, Adrián David  e  VALDES-VAZQUEZ, Jesús Gerardo. Simulation model to estimate bending overstrength in concrete elements. Dyna rev.fac.nac.minas [online]. 2017, vol.84, n.200, pp.112-120. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v84n200.52903.

A simulation model to estimate bending overstrength in reinforced concrete elements is presented. The simulation model employs basic design hypotheses according to NTC-04 [1] and ACI 318-11 [2] for rectangular concrete beams subjected to bending with rebars in the tension zone only. Concrete compression strength is included in the model as a random variable to estimate the uncertainty in bending strength on rectangular beams. Concrete compressive strength is evaluated for more than 16,000 compression tests for mixtures designed for 200 kgf/cm² (19.6 MPa) and 250 kgf/cm² (24.5 MPa). The main objective of this work is to assess the influence of real concrete compressive strength on the bending overstrength computed from analytical models used by actual construction codes like NTC-04 and ACI 318-11.

Palavras-chave : simulation model; bending overstrength; concrete compressive strength; random variable.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )