SciELO - Scientific Electronic Library Online

 
vol.84 número200The issue of thermal comfort of medical clothing in the operating roomUse of the order statistics when predicting pile foundation failure probability índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353

Resumo

MARTINEZ, Carola et al. Mg2Ni0.5Co0.5 compound obtaining by mechanical alloying and their performance on hydriding process. Dyna rev.fac.nac.minas [online]. 2017, vol.84, n.200, pp.240-246. ISSN 0012-7353.  http://dx.doi.org/10.15446/dyna.v84n200.51358.

This work presents the microstructural evolution of mechanically alloyed Mg2Ni0.5Co0.5 and a study of its hydriding properties. Mg, Ni, and Co elemental powders (atomic ratios of 2:0.5:0.5, respectively) were mechanically alloyed in a Spex 8000D high-energy mill for 36 h (amorphous sample) and subsequently submitted to a thermal treatment at 673 K for 15 min (nanocrystalline sample). The characterizations of the samples were performed with X-ray diffraction. A Sievert-type volumetric hydriding process was done at 363 K and with hydrogen pressure of 2 MPa. Desorption process was evaluated through differential scanning calorimetry. Based on the obtained results, it is possible to conclude that the amorphous structure absorbs more hydrogen, reaching a maximum of 3.6 wt. % H. Desorption process events depend on amorphous or nanocrystalline states.

Palavras-chave : Hydrogen Storage; Nanostructured Materials; Mechanical Alloying; Magnesium.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )