SciELO - Scientific Electronic Library Online

vol.85 número205Evaluation of turbidity and dissolved organic matter removal through double filtration technology with activated carbonAnalysis of the European tourist mines and caves to design a monitoring system índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google



versão impressa ISSN 0012-7353


HOYOS-ARANGO, David Bernardo; MEJIA-LOPEZ, Oscar León  e  GIRALDO-BARRADA, Jorge Enrique. Construction of a short circuit frequency map to define GMAW-S parameters during WPSs development. Dyna rev.fac.nac.minas [online]. 2018, vol.85, n.205, pp.240-248. ISSN 0012-7353.

A short circuit frequency map was constructed for GMAW-S using a carbon steel filler metal class AWS ER70S-6 and 75%Ar-25%CO2 shielding gas. This kind of map is proposed as a tool for selecting GMAW-S currents and voltages that enable welds with higher stability and quality. The map was constructed by analyzing current and voltage signals recorded during welding applications at 5000 samples/second. Adequate operation regions were defined over the map based on visual inspection results of bead-on-plate welds and the establishment of instability boundaries. Some examples were analyzed by locating two common parameters for industrial welding qualification (current and voltage) and drawing the limits established by AWS D1.1:2015 code for these essential variables (±7% PQR voltage and ±10% PQR amperage) on the frequency map. The results show that sometimes these limits may contain regions with poor stability related to electrode stubbing against the base metal and lack of arc re-ignition.

Palavras-chave : metal transfer mode (MTM); MTM map; short circuit frequency map; stubbing; WPS.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )