SciELO - Scientific Electronic Library Online

 
vol.87 número215Estimación de medidas antropométricas de la mano para el diseño de guantes cosidos, a partir del método de relaciones de escalaDeterminación de parámetros y análisis de desempeño de modelos de carga para fluorescent recessed lightings ante variaciones de la señal de alimentación índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183

Resumen

PAZ-PENAGOS, Hernán. Electric power generation from a turnstile. Dyna rev.fac.nac.minas [online]. 2020, vol.87, n.215, pp.156-162.  Epub 13-Ene-2021. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v87n215.86789.

This research aimed to design, simulate in SolidWorks, build, and test two energy conversion mechanisms using mechanical gears and through 0 neodymium magnets. The used source of mechanical energy was the rotational movement of the turnstile arm, generated by pedestrians who enter and leave the campus at Escuela Colombiana de Ingeniería Julio Garavito. To achieve it, the following tasks were performed: the literature review, parameterization of pedestrians’ entrance and exit, characterization of the turnstile, simulation, construction, and the assessment of the mechanisms. The obtained energy conversion results varied from 7v to 11v (1W) for the mechanism using neodymium magnets, and from 12v to 17v (12W) for the mechanical gears. The developed system aims to promote environmental commitment and exploit the lost energy resulting from people’s daily activities.

Palabras clave : electric power generation; gears; magnetic induction; turnstile.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )