SciELO - Scientific Electronic Library Online

 
vol.89 número223Handling of used lubricating oil in Tabasco, MexicoExergo-economic study of the process for obtaining biochar derived from oil palm kernel shell on an experimental and pilot scale índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


DYNA

versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183

Resumo

HERRERA-ARDILA, Yenny Mayerly; ORREGO, David; BEJARANO-LOPEZ, Andrés Felipe  e  KLOTZ-CEBERIO, Bernadette. Effect of heat treatment on vitamin content during the manufacture of food products at industrial scale. Dyna rev.fac.nac.minas [online]. 2022, vol.89, n.223, pp.127-132.  Epub 15-Nov-2022. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v89n223.99775.

The molecular structure of vitamins makes them easily degradable under various conditions such as temperature, pressure, and pH. It is necessary to understand and determine the stability of vitamins during the processing of food products to ensure their presence at the time of consumption. In this study, the degradation of vitamins added was assessed before and after heat treatments during the manufacturing of food products. Vitamins of interest were quantified by HPLC. The results obtained allowed to establish that prolonged heating of the product caused water-soluble vitamins degradation. The greatest degradation was observed for vitamin B12, decreasing by 94% in a baby porridge product after pasteurizing at 85 °C for 15 s. In contrast, vitamin B1 showed the lowest reduction in a chocolate milk, decreasing by 4% after ultra-high-temperature (UHT) treatment at 139 °C for 5s.

Palavras-chave : degradation; vitamins; heating; industrial scale.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )