SciELO - Scientific Electronic Library Online

 
vol.27 número1A new method for designing floor slabs on grade due to the difficulty of applying simplified design methods, amongst them being the Portland Cement Association (PCA) and Wire Reinforcement Institute (WRI) methodsA comparative analysis of calculating sample size for carrying out household surveys when constructing a passenger origin-destiny matrix between a sample design and applying a population percentage índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


Ingeniería e Investigación

versão impressa ISSN 0120-5609

Resumo

RODRIGUEZ BARACALDO, Rodolfo; BENITO PARAMO, Josep Antonio  e  CABRERA MARRERO, José María. Severe plastic deformation for obtaining nanometric and ultrafine-grained materials. Ing. Investig. [online]. 2007, vol.27, n.1, pp.101-105. ISSN 0120-5609.

The aim of this paper is to provide a general overview of nanocrystalline and ultra-fine grain material production using severe plastic deformation (SPD), this being one of the most active research fields in the mechanical processing of materials. The paper gives an explanation of the more important SPD techniques (mechanical milling, equal channel angular pressing, high pressure torsion, extrusion-compression and accumulated roll-bond) as regards fundamental principles, advantages and limitations. Some experimental results for iron and copper obtained by this paper’s authors are attached. These materials’ great potential is shown in several fields of use, especially in the aerospace industry. Current research prospects are also referred to in terms of structural and mechanical behaviour and the development of large-scale industrial processing.

Palavras-chave : severe plastic deformation (SPD); ultra-fine grain; mechanical milling.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons