SciELO - Scientific Electronic Library Online

vol.27 número2A predictive model of natural gas mixture combustion in internal combustion enginesStudying a new technique and implementing a pilot-line process for obtaining dextrins from cassava starch índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google


Ingeniería e Investigación

versão impressa ISSN 0120-5609


LARRANAGA RUBIO, Sherley  e  MOLINA HERRERA, Maritzabel. Grade-two resistance screw shear connector behaviour for a 28 MPa concrete section. Ing. Investig. [online]. 2007, vol.27, n.2, pp.18-25. ISSN 0120-5609.

Screw shear connectors are being more commonly used in compound concrete sections in Colombia; however, they have been designed in line with Colombian Seismic-Resistant Standards (NSR-98) rather than those established for stud shear connectors. This work represents a starting point for analysing screw shear connector behaviour. 54 specimens were made for the experiment, consisting of a metallic profile and two concretes slabs where the connectors were embedded. 1/2” (12.7mm), 5/8” (15.9mm) and 3/4” (19.1mm) diameter screws were used and placed at different distances. The push-out test was used with these specimens and results were provided by using some equations for determining this type of connector’s strength in steel-concrete sections.

Palavras-chave : stud shear connector; compound section; screw.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons