SciELO - Scientific Electronic Library Online

vol.27 número2Grade-two resistance screw shear connector behaviour for a 28 MPa concrete sectionEthyl ester production from (RBD) palm oil índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados



Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google


Ingeniería e Investigación

versão impressa ISSN 0120-5609


ARISTIZABAL GALVIS, Johanna; MORENO, Fabián Leonardo  e  BASTO OSPINA, Gustavo. Studying a new technique and implementing a pilot-line process for obtaining dextrins from cassava starch. Ing. Investig. [online]. 2007, vol.27, n.2, pp.26-33. ISSN 0120-5609.

This study proposes and develops a new technique for dry-route dextrin production consisting of converting cassava starch pellets on a fixed-bed dryer; this technique is more applicable to rural Colombian agro-business in technical, economic, social and environmental terms, particularly to so-called “rallanderías” compared to currently available dextrin production technology. The proposed process is practically clean, requires low investment, allows humid starch-cake to be directly used without the need for expensive pre-drying equipment, eliminates large quantities of dust being produced thereby leading to an easily-handled and packaged product being obtained. Different dextrinisation technologies were compared; a pilot-line was implemented which included blending, granulation and drying units. The variables evaluated were cassava-starch variety, catalyst concentration and agglutinant type and concentration; pellet-size, bed-thickness and air-speed were also evaluated during blending, granulation and drying stages, respectively. It was determined that using 0.1-0.3% HCl on cassava starch, 1.5-3% cassava starch paste, L/D=1.25 pellets, a 55ºC pre-drying phase and 150ºC final conversion on 2 cm thickness fixed-bed dryer at 2-3 m/s air speed led to obtaining low friability (13%), high rupture force (1.3 kg-f), high solubility (90-100%) and low fluidity (50-70 s) dextrin pellets. An adhesive was then obtained from the dextrin resulting from the process described above for sealing cardboard-boxes and cartons having greater stickiness, tensile strength and stability compared to corn dextrin adhesive, suggesting that the proposed new cassava dextrin production technique constitutes a good technological option for adding value to Colombian cassava production at small “rallandería” level.

Palavras-chave : dextrin; cassava; starch; dextrinisation; pelletisation; fixed-bed dryer.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )


Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons