SciELO - Scientific Electronic Library Online

 
vol.28 número1Estimación de la susceptibilidad ante deslizamientos: aplicación de conjuntos difusos y las teorías de la posibilidad y de la evidenciaDeterminación de la curva de destilación flash para cortes de petróleo utilizando simuladores comerciales índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ingeniería e Investigación

versión impresa ISSN 0120-5609

Resumen

VALENCIA RESTREPO, Doralba  y  VALENCIA CLEMENT, Gabriel. Evaluating response modification factor (R) for some types of steel structure. Ing. Investig. [online]. 2008, vol.28, n.1, pp.41-49. ISSN 0120-5609.

In this paper the use of the response modification factor, R, as tabulated in the Colombian Design Code, NSR-98, and many other design codes, in the evaluation of the internal member forces generated for the action of the design earthquakes in steel structures and the inconsistencies that are present when designing structures when it is necessary to comply drift limits of 1% are questioned. The design of 45 frames corresponding to the seismic resistance system of 5 buildings, that is, 15 special moment frames (PRM), 15 special concentrically braced frames (PAC) and 15 eccentrically braced frames (PAE are presented). The external load evaluation and their combination used in estimating internal loads, as well as rigidity demands (1% drift) were made according to NSR-98 requirements, on the other hand, member strength requirements was evaluated using the seismic provisions for structural steel buildings, AISC-2005. The response modification factor of the 45 frames to different structural performance levels is evaluated, by means of modal pushover analysis. It has been found that this factor is not constant for any of the three structural systems (PRM, PAC and PAE) as NSR-98 suggest and additionally the values of the response modification factor found in the present investigation, are smaller to those tabulated in this design code, which govern the common practice of the structural design; leading to significant errors in the evaluation of the design forces, not only in the structure but on the support elements (base plates, foundations, shear walls) and structures attached to the seismic resistance system.

Palabras clave : response modification factor; ductulity; the strong-column weak-beam concept; elastic respose; inelastic response; plastic mechanism.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons